# Errors

> Qoq errors: the messages of failed swaps, oracle responses, liquidity changes and owner calls, what causes each one, and how to fix it.

This page is part of the Qoq docs. Qoq is the DEX `slimedragon.near/amp` on the Intear DEX contract, `dex.intear.near`, and every call goes to that contract. https://docs.intear.tech/qoq/llms-full.txt has all of its pages in one file, and https://docs.intear.tech/llms.txt lists every page of the Intear docs.

When Qoq fails a call, the engine's error contains `[slimedragon.near/amp] Dex panicked:` followed by the message, and nothing in the call changes. Some messages come after a line like `panicked at dexes/amp/src/lib.rs:63:13:`, so match the message itself rather than `Dex panicked: <message>`. A swap after an [oracle request](https://docs.intear.tech/qoq/guides/swaps.md#pools-an-oracle-prices) fails in its own receipt, once the oracle responds: see [If the operations don't run](https://docs.intear.tech/intear-dex/guides/oracles.md#if-the-operations-dont-run). See the [engine's errors](https://docs.intear.tech/intear-dex/reference/errors.md) for everything around it, like balances, registrations, oracle requests and fee discounts.

## Any call

| Message | Cause |
| --- | --- |
| `This method can only be called directly, not in a transfer call` | The call doesn't come [directly](https://docs.intear.tech/intear-dex/guides/dexes.md#what-a-dex-sees) from the caller: a `DexCall` in the operations of a deposit |
| `Invalid args`, or `Failed to deserialize input from Borsh` for a `dex_view` | `args` isn't the Borsh of the method's arguments. See [Types](https://docs.intear.tech/qoq/reference/types.md) |
| `Pool not found`, `Pool <id> not found` | No pool with this ID |
| `No assets should be attached`, `No assets other than NEAR should be attached`, `No assets other than the two pool assets should be attached` | `attached_assets` has assets the method doesn't take |
| `Not enough near attached for storage. Required: <cost>, attached: <amount>` | Attach more NEAR. What's left is sent back |

## Swaps

| Message | Cause |
| --- | --- |
| `Invalid message` | `message` isn't a list of [routes](https://docs.intear.tech/qoq/guides/swaps.md#the-message), or has more after the routes than an old fee discount |
| `No routes`, `Route has no pools` | An empty list of routes or pools |
| `Route fractions must add up to 100%` | The `fraction`s of the routes don't add up to 1000000 |
| `Pool <id> doesn't have <asset>` | A pool of the route doesn't have the asset that comes into it |
| `Route doesn't end in asset out` | The last pool of a route doesn't output `asset_out` |
| `Pool is empty` | One of the pool's balances is 0 |
| `Amount must be greater than 0` | A swap of 0, or a split so small that a route got 0 |
| `Amount must be less than out balance` | An exact output that would take all of the pool's balance |
| `Swaps on these pools must start with an oracle request of the prices of <assets> from <oracle key>` | A swap through a pool that an oracle prices, without an [oracle request](https://docs.intear.tech/qoq/guides/swaps.md#pools-an-oracle-prices) for these assets from this oracle first, or a simulation without them in `oracle_response` |
| `Pools of a swap must ask the same oracle` | The message goes through pools of different oracles. Swap through them in separate swaps, after separate requests |

## Oracle responses

The oracle responded, but Qoq can't use its prices, so the swap fails. These mean a problem with the oracle, or with the `oracle_response` of a simulation.

| Message | Cause |
| --- | --- |
| `Invalid oracle response` | The response isn't the Borsh of a [`PricesResponse`](https://docs.intear.tech/qoq/reference/types.md#pricesrequest-and-pricesresponse) |
| `Oracle has prices of <count> exchanges, but at least 3 are needed` | Fewer than 3 exchanges |
| `Oracle has more than one price of <exchange>` | Two exchanges with the same name |
| `Oracle has <count> prices of <exchange>, but <requested> assets were requested` | An exchange without one price for each requested asset |
| `Oracle has a zero price of <exchange>` | A price of 0, or one so low that the price between the pool's assets rounds to 0 |
| `Prices of exchanges are more than 0.5% apart: from <lowest> to <highest>` | The highest price of the pool's assets is more than 0.5% above the lowest |

## Liquidity

| Message | Cause |
| --- | --- |
| `User has not registered using register_liquidity` | [Register](https://docs.intear.tech/qoq/guides/liquidity.md#register) for the pool first |
| `Asset 1 not found`, `Asset 2 not found` | `add_liquidity` without both of the pool's assets attached |
| `Amounts must be greater than 0` | An attached amount of 0 |
| `Can't mint zero shares` | The attached amounts are too small for one share |
| `Slippage error` | The addition would mint fewer shares than `min_shares_received` |
| `Min shares received must not be specified for empty pools` | `min_shares_received` for a pool with no liquidity |
| `Can't remove zero shares` | `shares_to_remove` is `Some(0)` |
| `User has no shares` | Removing from a pool you have no shares of |
| `Not enough shares to remove` | `shares_to_remove` is more than your shares |
| `Liquidity fees are already taken this way` | `set_liquidity_fee_payout` with the payout you already have |

`remove_liquidity` with `min_assets_received` that it can't meet fails with `Slippage error` too.

## Owner

| Message | Cause |
| --- | --- |
| `Only the owner of the dex can create pools`, `Only the owner of the dex can set the amplification`, `Only the owner of the dex can set the fee`, `Only the owner of the dex can set the oracle key`, `Only the owner of the dex can migrate` | The call isn't from slimedragon.near |
| `Assets must be different` | Both assets of `create_pool` are the same |
| `Only NEAR, NEP-141, and NEP-245 assets are supported` | An NFT in `create_pool` |
| `Assets can have at most 38 decimals` | `decimals` above 38 |
| `Amplification must be from 1 to 1000000` | `amplification` out of range |
| `The fixed price must be greater than 0` | A `Fixed` price of 0 |
| `The fee must be less than 100%` | `fee` of 1000000 or more |
| `Initial liquidity amounts must be greater than 0` | `initial_liquidity` with a 0 |
| `Near should be attached for storage`, `Not enough NEAR attached for initial liquidity and storage` | `create_pool` without enough NEAR |
| `Attached <asset> must be equal to its initial liquidity` | The attached amount of an asset isn't its `initial_liquidity` |
| `No assets other than NEAR and initial liquidity should be attached` | Other assets attached to `create_pool` |
| `The pool has a fixed price, not an oracle` | `set_oracle_key` on a pool with a fixed price |
| `Migrate takes no args` | `migrate` with arguments |
